Missing Mileage and Manual Entries: How to Fix Tachograph Record Gaps Before DVSA Does
A tachograph record can show a gap even when a driver has completed a full shift. Perhaps the vehicle moved without a driver card recording the activity, or work done away from the vehicle was not entered. The mileage is there, but the record does not explain who was driving or what the driver was doing.
That gap needs a prompt, evidence-based investigation. If vehicle movements cannot be reconciled with planned work and driver records, an unexplained gap may look like unrecorded driving or other work. Weak driver oversight can also raise wider concerns about how well an operator manages compliance.
This guide explains common causes, what a driver should do and how to close the loop as an operator.

What does "missing mileage" mean?
"Missing mileage" is a practical term for vehicle movement that cannot be matched to a complete, clear tachograph record. A vehicle unit may show movement, while the driver card has no corresponding activity or the driver cannot account for the period.
It does not, by itself, explain what happened. A gap might have a straightforward cause, but it still needs checking. Your aim is to establish who used the vehicle, what activity took place and whether the record was completed using a permitted method.
For background on tachograph responsibilities, see our guide to tachographs and driver hours. If you need help interpreting a printout, read Tacho Printouts Explained: How to Read Tachograph Data.
How do record gaps happen?
Common causes include:
The card was not inserted before the vehicle moved. This might happen when a driver is rushing or assumes the movement is too short to matter.
A vehicle was swapped mid-shift. The driver may have moved to another vehicle but missed the card or the relevant manual entry.
The card was left in another vehicle. A driver may return to a vehicle without checking which card is in the tachograph.
A tachograph or card fault occurred. The equipment may not record activity as expected.
Yard or workshop movements took place. A vehicle may have been moved by a driver, fitter or other worker, but the operator has not identified who it was.
A vehicle was used privately or as a hire vehicle. The operator needs to establish the circumstances and whether the journey was in scope of the rules. Do not assume that a particular movement is automatically exempt.
A gap can also arise when a driver selects the wrong mode. That is different from a missing card, but it still needs correcting and explaining through the appropriate record.

Why gaps are harder to miss than they used to be
Two things have changed the picture for UK operators.
First, smart 2 tachographs let enforcement authorities interrogate the unit remotely, without stopping the vehicle. A roadside check is no longer the only point at which your data is looked at.
Second, the scope of the rules widened. Since 1 July 2026, assimilated drivers' hours rules apply to light goods vehicles of 2.5 tonnes or more on international journeys, and a full smart 2 tachograph must be fitted to goods vehicles over 2.5 tonnes used for international journeys for hire and reward. Goods vehicles between 2.5 and 3.5 tonnes used only within the UK do not have to have a tachograph fitted.
That catches out operators who have recently moved into scope. A van fleet that has started running to the continent can find itself with drivers who have never used a card properly, no download routine, and no habit of making manual entries. The gaps are not dishonesty. They are a system that was never built.
If that sounds familiar, the honest starting point is a review of what you currently record, rather than a hope that nobody asks.
What manual entry methods are permitted?
Drivers must produce a record of their whole daily working period. Manual entries are required when they cannot operate the tachograph, have not been allocated a vehicle or are working away from the vehicle. They may also be needed when a tachograph develops a fault, an unforeseen event affects the record, or an incorrect mode needs correcting.
When a tachograph is not available to record data in real time, the permitted manual entry methods are:
A manual entry on an analogue record sheet.
A manual entry on digital printout paper.
Retrospective use of the manual input facility on a digital tachograph when the driver card is next inserted.
A diary or timesheet is not a permitted substitute for a tachograph manual record. DVSA accepts completed and signed attestation forms only by limited exception; the official guidance also notes that Commission Decision C(2009) 9895 continues to apply for journeys through EU member states. Check the relevant official guidance for the circumstances in which that exception applies.
With digital and smart tachographs, the clock records in UTC. Between the last Sunday in March and the last Sunday in October, drivers must account for the one-hour difference when entering activity. For example, activity from 06:00 to 08:00 BST is entered as 05:00 to 07:00 UTC.

What should the driver do on the day?
Drivers should:
Check the card and vehicle before moving. Use the correct driver card in the correct vehicle and make sure the tachograph is recording.Record activity that the tachograph could not capture. Use the appropriate manual entry method for the situation. If the card was removed, make the required manual inputs when it is next inserted.Report a fault or recording error promptly. Follow the relevant procedure and make a note on printout paper where the rules require it.Tell the operator what happened. Give a clear account while the details are fresh, including any vehicle change or work away from the vehicle.Check the times carefully. Account for UTC when making digital manual entries during British Summer Time.A forgotten card is not the same as a lost, stolen, damaged or malfunctioning card. A driver who has forgotten their card must not drive a vehicle fitted with a digital or smart tachograph; manual records are not an acceptable substitute.
If a card is lost, stolen, damaged or malfunctioning, a driver may drive without it for a maximum of 15 calendar days, following the required procedure. This includes producing a printout at the start and end of the day, marking it with the driver's name or card or licence number, adding manual entries and signing it. The driver must report the problem to DVLA and apply for a new card within 7 calendar days.
Operators should never back-fill records simply to make them look complete. Do not guess at times, activities or drivers, or ask a driver to enter details they cannot verify. Record what is known, what remains uncertain and what action you have taken.
A weekly checklist for operators
Vehicle-unit data must be downloaded at least every 90 days and driver-card data at least every 28 days. Those are maximum intervals, not a reason to leave exceptions unchecked between downloads. Build a regular review into your compliance routine.
There is a practical reason to be quicker than the minimum. A vehicle unit holds roughly 365 days of average data and a driver card roughly 28 days, after which the oldest data is overwritten and lost. A driver card in particular can hold less than 28 days where a driver records a high number of activity changes in a day. If a card download slips, the evidence you need to close a gap may already be gone.
Downloads are also required outside the routine: immediately before control of a vehicle passes to someone else, for example when it is sold or un-hired; immediately before a driver leaves your employment, which includes agency drivers; without delay if a unit or card is malfunctioning; and whenever data could foreseeably be erased.
Each week, check:
Vehicle movements: Are there movements without a matching driver card or other clear record?
Driver and vehicle changes: Do card data, vehicle-unit data and allocation records agree about who used which vehicle?
Unusual use: Are there unexplained movements in yards, workshops, hired vehicles or during private use?
Manual entries: Are there gaps in the driver's daily record, and has the correct permitted method been used?
Faults and corrections: Has a fault, unforeseen event or wrong-mode recording been explained and dealt with?
Downloads and records: Are downloads being completed on time, and can you produce tachograph records to enforcement officers for 12 months?
For a fixed week in which in-scope driving takes place, drivers must keep a full record for all seven days of other work and availability, as well as driving, breaks and rest, annual leave and sick leave. Where there is no in-scope driving in a fixed week, the required records are different: other work, availability and rest are recorded in blocks, including the start and end times for weekly rest.
For wider advice on routine monitoring, see How to Manage Drivers' Hours and Tachograph Compliance and Common Driver Hours Infringements and How to Avoid Them.
How to investigate and close a gap
Treat each unexplained movement as an exception to resolve, not just a line on a report.
Identify the gap. Note the vehicle, date, time and mileage or movement shown in the available tachograph information.Check relevant records. Compare vehicle-unit and driver-card data with vehicle allocation, job or delivery information, workshop records and any other reliable operational evidence.Ask the driver or relevant staff member. Record what they say, including when you spoke to them. If the person who moved the vehicle is not known, record that too.Decide what can be established. Distinguish confirmed facts from assumptions. If a record needs correcting, use the permitted method; do not alter records to create a tidy-looking account.Document the outcome and action. Record who investigated, when, what evidence was checked, what the driver said, the conclusion, any corrective action and the date the matter was closed.Look for a repeat cause. If the same type of gap recurs, check whether vehicle handovers, driver instruction or the process for reporting faults needs attention.It also helps to be clear about where the responsibility sits. Operators are required to ensure drivers are properly trained and instructed on the rules and on using the tachograph correctly, to schedule work so the rules can be met, to make regular checks of charts, manual records and digital data, and to take all reasonable steps to prevent breaches. A gap that nobody checked is therefore not a neutral administrative slip. It is a gap in the checks you are expected to make.

Keep the investigation alongside the relevant tachograph records. Those records must be available to enforcement officers for 12 months, so the note explaining what happened is worth as much as the data itself.
If gaps occur repeatedly, or you find movements that cannot be explained, take a broader look at your controls. Our article on tachograph failures and operator oversight discusses why these issues should not be left unresolved.
Frequently asked questions
What is missing mileage on a tachograph?
It is a common term for vehicle movement that cannot be matched to a clear driver record. The movement needs investigating to establish who used the vehicle and whether the activity was recorded correctly.
Can a driver use a diary for manual entries?
No. Diaries and timesheets are not permitted substitutes for the specified tachograph manual record methods. The GOV.UK guidance describes a limited exception for completed and signed attestation forms.
What happens if a driver forgets their card?
A driver who has forgotten their card must not drive a vehicle fitted with a digital or smart tachograph. Manual records do not make that acceptable. The procedure for a lost, stolen, damaged or malfunctioning card is different.
How far back can DVSA check tachographs?
At the roadside, drivers must be able to produce records for the current day and previous 28 calendar days for domestic or AETR journeys, or 56 days for international journeys to and from an EU member state. Operators must also be able to produce records to enforcement officers for 12 months.
Should I discipline a driver for missing mileage?
First establish what happened. Record the driver's explanation, check the evidence and consider whether the cause was an error, a fault, unclear instruction or something more serious. Apply your procedure consistently, and address any training or system weakness as well as individual conduct.
Need help reviewing your records?
If you are finding unexplained movements or want a second pair of eyes on your driver-hours controls, JS Transport Solutions can review your compliance or carry out an independent operator licence compliance audit. We can also discuss external Transport Manager support. There is no need to have all the answers before you enquire.
For practical operator and staff awareness, you can also read about our Operator Licence Awareness Training.
Official further reading




